Archived entries for

Reflection of Mineral, Yasuhiro Yamashita

reflection-mineral-haouse-Yasuhiro-Yamashita-architect

De los Autores:

El sitio está en Nakano, ubicado cerca del centro de Tokio. Se trata de una pequeña parcela de 44,62 m2 limitado por dos calles. Conforme a las condiciones legales y en respuesta al deseo del cliente de un «techo de garaje« el volumen está recortado de varias direcciones.
La ‘reflexión’ y ‘Minerales’ son palabras clave que ayudan a su vez.

reflection-mineral-tekuto-makoto-yoshida05 reflection-mineral-tekuto-makoto-yoshida03
“Minerales” se considera que combinan las propiedades abstractas (objeto conceptual) con propiedades no figurativo (objeto de la materia, cuya presencia es más evidente). Los cambios de transparencia, translúcido u opaco se producen de acuerdo a la luz que entra en cierta forma a ciertos ángulos. El cuerpo no puede de ninguna manera ser tratado como un elemento simple.

«Reflexión» es una palabra clave relacionada con la percepción del espacio. La visión es un factor importante en el reconocimiento del espacio. Mi interés radica en dicha zona de la percepción visual. Mediante la configuración de volúmenes de poliedros (caras, con tres factores: transparentes, translúcidas y opacas) y de enredo en tres vías de dimensiones dentro del espacio interior, la reflexión visual es inducida, lo que resulta en desviación de la restricción del espacio.

reflection-mineral-tekuto-makoto-yoshida04 reflection-mineral-tekuto-mako-toyo-shida01 reflection-mineral-haouse-Yasuhiro-Yamashita-architect03

Entonces, como la gente se mueve dentro del espacio o con la luz que entra en un ángulo de algunos cambios de la presencia de la faceta, con lo que acerca de la diversidad en el espacio. En el interior del poliedro equipado con carácter abstracto como son la cocina, escaleras, pisos y la caja de baño equipado con la funcionalidad que existen como objetos no figurativo.

El cuarto de baño en el tercer piso cuenta con un acabado de espejo en acero inoxidable, que combina ambos factores de objeto y la reflexión, y se presenta como una sustitución de los «minerales» y «reflexión».

L relación con el entorno se expresa en la pequeña plaza abierta a la calle, un espacio similar a piloti que surgió después de colocar en el garaje en planta baja. Su sentimiento de liberación podría provocar algún cambio en el paisaje urbano circundante.

Link:  tekuto.com

The site is located near the center of Tokyo. It is a small plot of 44.62 m2 bounded by two streets. Conforming to legal conditions and in response to the client’s wish for a ‘roofed garage’ the volume was trimmed from various directions. ‘Minerals’ and ‘reflection’ are keywords that help turn the negative factor of elimination into a positive one.

‘Minerals’ are considered to combine abstract properties (conceptual object) with nonfigurative properties (object whose presence of matter is more obvious). Changes from transparent, translucent to opaque occur according to light entering in certain ways at certain angles. The body can in no way be treated as a simple element.

‘Reflection’ is a recent keyword pertaining to the perception of space. Vision is an important factor in the recognition of space. My interest lies in such area of visual perception. By shaping volumes in polyhedra (facets with three factors―transparent, translucent and opaque) and entangling them in three-dimensional way inside the internal space, visual reflection is induced, which results in deviation from the restrictiveness of space.

Then as people move inside the space or with light entering at a certain angle the facet’s presence changes, bringing about diversity in space. Inside the polyhedron equipped with such abstractiveness are the kitchen, counter shelf, stairs, floors and toilet box equipped with functionality that exist as nonfigurative objects.

The bathroom box on third floor features a mirror finish in stainless steel, which combines both factors of object and reflection, and presents itself as a substitution of both ‘minerals’ and ‘reflection’.

Relationship with the surrounding environment is expressed in the small plaza open to the streets, a piloti-like space that emerged after placing the garage on ground floor. Its liberating feeling might trigger some change in the surrounding streetscape.

Facultad de arte y arquitectura en Évora, Portugal.

Facultad-de-artes-y-arquitectura-ines-lobo-ventura-trindade_001

“Los edificios están diseñados en torno a las máquinas, y no alrededor de personas, en términos físicos o trascendentales, que son reducidos a meros operadores, trabajadores, simples engranajes de la máquina.”

Visto desde la distancia del centro histórico y el enfoque en la dirección de la fábrica Leões, permite comprenderse que, curiosamente, su valor principial consiste en su volumen excesivo que se impone abruptamente en la meseta.

Facultad-de-artes-y-arquitectura-ines-lobo-ventura-trindade Facultad-de-artes-y-arquitectura-ines-lobo-ventura-trindade_004

Los anexos que no formaban parte de la construcción original fueron eliminados, al igual que toda la construcción provisional en el edificio. La naturaleza espacial de los edificios se hizo evidente.

Un edificio se añade que los sustitutos de los anexos, por lo tanto la configuración del nuevo patio, con talleres asociados, una cafetería y un cobertizo. Otras infraestructuras se añadieron a los espacios existentes, que proporcionan las instalaciones necesarias para la enseñanza, y mobiliario complementario.

Facultad-de-artes-y-arquitectura-ines-lobo-ventura-trindade_002 Facultad-de-artes-y-arquitectura-ines-lobo-ventura-trindade_008

Con el conocimiento creciente de los antiguos espacios industriales y los sistemas se encuentran algunas de las estrategias para su reutilización en la construcción de las escuelas. Primero están los grandes cubiertas que protegían a la plataforma ferroviaria y la carga y otras zonas de descarga, el cual difícilmente podría cambiar más en su delicada ligereza con la enorme masa de las construcciones.

Facultad-de-artes-y-arquitectura-ines-lobo-ventura-trindade_007 Facultad-de-artes-y-arquitectura-ines-lobo-ventura-trindade_005

Ahora volver a introducir; alberga a los profesores y los estudiantes en lugar de productos y materias primas, la construcción del lugar de reunión del conjunto de la escuela, que resume el patio principal se establece una relación visual entre todos los espacios del conjunto, cuyo espacio central abierto es uno inesperado campo verde que recuerda a los campus universitarios, hasta entonces tan distantes de este contexto.

Este cuerpo se conecta a los diferentes elementos en el mismo tiempo que construye el espacio de la escuela, un amplio atrio y alargado, una especie de columna vertebral que permite a los organismos que antes estaban aisladas a funcionar una vez más, pasando a formar parte de una sola estructura.

Fotografías de Leonardo Finotti

Enlaces:

Inês Lobo Arquitectos

Ventura Trindade Arquitectos.

Refurbished for the Universidade de Évora, the project involved removing more recent annexes from the original buildings, reconfiguring interior spaces and adding new infrastructure.

Structures originally used to shelter railway platforms have been re-appropriated to join separate buildings together.

Seen from a distance from the historic centre and the approach in direction of the old Leões factory allows one to understand that, oddly enough, its principle value consists of its excessive volume that is imposed abruptly on the plateau.

Buildings designed around the machines they would house, and not around people, in physical or transcendental terms, who are reduced to mere operators, workers, simple cogs in the machine.

Original programme – Built in 1916, the Alentejo Milling Society became the Leões pasta factory in the 1970s.

A partially occupied but machine-less building, appropriated by man. Spaces that, due to their versatility and relationship with the territory, became places for teaching.

New programme – University of the arts, department of visual arts and department of architecture

The annexes that were not part of the original construction were removed, as were all provisional construction inside the building. The spatial nature of the buildings became clear.

A building is added that substitutes the annexes, thus configuring the courtyard afresh, with associated workshops, a cafeteria and a lean-to. Other infrastructures were added to the existing spaces, which provide the necessary facilities for teaching, and extra furniture.

With increasing knowledge of old industrial spaces and systems we find some of the strategies to reuse in the construction of the schools. First are the large coverings that protected the railway platform and other loading and unloading areas, which could hardly contrast more in their delicate lightness with the enormous mass of the constructions.

Now re-introduced, it shelters teachers and students instead of products and raw materials, constructing the meeting place of the school ensemble, it outlines the main patio establishing a visual relationship between all the spaces of the ensemble, whose central open space is an unexpected green field which is reminiscent of university campuses, until then so distant from this context.

Vía: dezeen.com

DOLMEN, Silla de cartón, plegable y portátil

Dolmen-paper-chair

El Dolmen Silla plegable portátil (1000 yenes) es la silla más ligera del mundo, y es la primera silla de papel en ser comercializada.

Un peso de sólo 360 gramos (0.8 libras) y  la anchura de un libro cuando está cerrada, que encaja perfectamente en su bolso. Se emplea una estructura de nido de abeja que puede soportar el peso de casi cualquier persona. Me imagino que sería útil en viajes de campamento o salidas al aire libre. Dicen que puede durar toda la vida “si se utiliza con cuidado.”

Dolmen-paper-chair02

La página de los diseñadores: idsite.co.jp (en japonés)

Vía: spoon-tamago.com, noquedanblogs.com

The Dolmen Portable Folding Chair (1000 yen) is the world’s lightest chair, and the first paper chair ever to be commercialized. Weighing just 360 grams (0.8 lbs) and collapsing to the width of a book, it fits right into your bag. It employs a honeycomb structure that can support the weight of just about anyone. I would imagine it would be helpful on camping trips or other outdoor outings. They say it can last a lifetime “if used gently.” I wonder what they mean by that…

REZ – Concurso internacional de estudiantes universitarios

rez1

REZ-Student Competiotion – Concurso de estudiantes para el diseño de un edificio de la residencia de la Universidad de Toronto

La competencia comienza: 21 de septiembre 2009

Presentar a más tardar: 28 de diciembre 2009

La Universidad de Ryerson, líder de Canadá en la educación innovadora, anuncian un concurso internacional para el diseño de un edificio residencia de arte. Está enfocado a los estudiantes matriculados en las escuelas de arquitectura y disciplinas afines.

Rez-architectural-students-competition-Canada

El sitio de la competencia se encuentra en el campus de la Universidad de Ryerson en Toronto, Canadá. El edificio de la residencia se destina a proporcionar vivienda y servicios conexos para una sección transversal representativa de la población de la Universidad, incluyendo estudiantes, profesores, personal, y profesores visitantes.

Los participantes son animados a realizar la competencia en equipos multidisciplinarios y de buscar de entrada de la facultad y profesional.

La competencia comienza a mediados de septiembre de 2009.

REZ -Student Competition for the Design of a University Residence Building in downtown Toronto
Competition begins: September 21, 2009
Submissions due: December 28, 2009

Ryerson University, Canada’s leader in innovative, career-focused education, and the Design Exchange are pleased to announce an international competition for the design of an exemplary, state-of-the-art university residence building. Submissions are sought from students enrolled in schools of architecture and the allied disciplines. The competition site is located on the campus of Ryerson University in downtown Toronto. The residence building is intended to provide housing and related facilities for a representative cross section of the University’s population, including students, faculty, staff, and visiting scholars. Entrants are encouraged to undertake the competition in multidisciplinary teams and to seek faculty and professional input; entrants may not, however, undertake it as part of a course assignment. The competition commences in mid-September, 2009, with an all-electronic submission due in December, 2009.

Vía:  www.thearchitectureroom.com/

Slice House por Studio ST Architects

Slice-house-Studio-ST

Ubicado en Atlanta,Georgia; el equipo de arquitectos Studio St a desarrollado un proyecto de Zero Energy > Slice House

La  Slice House es un cuadro de extrusión de la que se cortaron rebanadas para reducir los metros cuadrados y crear una casa inteligente y hermosa.

Los cortes es la forma básica de revelar su forma y funciones. Un trozo es la parte delantera de la casa, pone la cochera en un plano inclinado y oculta el coche aparcado en la calle. La gran porción  del lado sur quita un volumen para crear una terraza cubierta. Se suman nuevos cortes para darle forma a la entrada, comedor, y varias ventanas.

Slice-house-Studio-ST_001

Forma

La suma de los cortes es un conjunto de espacios simples en su diseño y los materiales todavía espacialmente intrigantea. Cada ventana se coloca cuidadosamente para maximizar la conexión de la casa a la naturaleza y la luz.

Materiales

Hemos elegido utilizar materiales simples que tienen la belleza inherente. El nivel inferior es una combinación de suelos de hormigón visto, paredes blancas GWB, armarios de cocina blanco, grandes ventanales y algunos acentos de madera Plyboo para el corto tramo de escaleras hasta la cocina y las puertas de abrigo del armario.

Slice-house-Studio-ST_003 Slice-house-Studio-ST_002

Estructura y construcción

Base de hormigón – La base de la Casa Slice es una base de hormigón prefabricado y la base, permitiendo a la cochera en voladizo.

Paneles SIP – Sobre la base de hormigón, la casa está construida de Paneles Estructurales Aislados (SIP). Estos paneles son pre-cortados y pre-cableados para que coincida con las especificaciones del constructor y el GWB incluyen el acabado interior de la pared, permitiendo que la casa sea construida por tres personas en dos días, generando ahorros significativos en tiempo de construcción y costos. El SIP se unen entre sí y no requieren elaboración adicionales. La estructura actúa como un depósito, es  30% más fuerte que una casa de madera, y permite una mayor flexibilidad de diseño.

Sostenibilidad de energía cero Home (ZEH)

La casa es una rebanada cuidadosamente estudiada, casa sostenible que reducirá significativamente los costos de energía de los propietarios durante el uso de las tecnologías disponibles. Los actos a base de hormigón ofician como una masa térmica.

La luz del sol de invierno baja (en un ángulo de 32 grados en Atlanta) entra en el sur por grandes ventanas que dan a la gran sala, calefacciona el piso de concreto y modera los cambios de temperatura durante el día. El sol del verano alto (79,8 grados en Atlanta) está bloqueado por el voladizo de la azotea, permitiendo que la masa térmica de hormigón para mantener la casa fresca.

La SIP exterior tienen una calificación de R elevado de R-30 para las paredes y R-50 para el techo. La construcción SIP no sólo están protegidas, sino también más herméticos, lo que mejora la conservación de energía.

Low-E recubiertos con ventanas de doble acristalamiento también mejoran la eficiencia energética de la casa. La energía fotovoltaica (PV) sistema de paneles se puede agregar un adicional de $ 6500 – $ 10.000 para reducir aún más el consumo de energía.

Slice-house-Studio-ST_005 Slice-house-Studio-ST_006

Form

The house is an extruded box from which slices were cut to reduce the square footage and create an intelligent and beautiful house. Cuts into the basic form reveal its shape and functions. A slice in the front of the house places the carport on an incline and conceals the parked car from the street. A large opposing slice on the south side removes a volume to create a covered sun deck. A number of other slices give form to the entry, dining room, and several windows.

The sum of the slices is a set of spaces simple in their design and materials yet spatially intriguing. Each window was carefully placed to maximize the home’s connection to nature and light.

Materials

We chose to use simple materials that have inherent beauty. The lower level is a combination of exposed concrete floors, white GWB walls, white kitchen cabinets, large glass windows and a few accents of plyboo wood for the short flight of stairs to the kitchen and the coat closet doors.

Structure and Construction

Concrete Base – The base of the Slice House is a precast concrete foundation and base, enabling the carport cantilever.

SIP Panels – Above the concrete base, the house is constructed of Structural Insulated Panels (SIP). These panels are pre-cut and pre-wired to match builder specifications and include the interior GWB finish wall, allowing the house to be constructed by three people in two days, generating significant savings in construction time and cost. The SIPs are attached to one another and do not require additional stick framing. The structure acts as a shell, is typically 30% stronger than a comparable wood stud home, and allows greater design flexibility.

Sustainability Zero Energy Home (ZEH)

The Slice house is a carefully thought-out sustainable home that will significantly reduce the energy costs of the owners while using readily available technologies. The concrete base acts as a thermal mass. The low winter sunlight (at a 32 degree angle in Atlanta) enters the large south-facing windows of the great room, heating the concrete floor and moderating the temperature changes throughout the day. The high summer sun (79.8 degrees in Atlanta) is blocked by the large roof overhang, allowing the concrete thermal mass to keep the house cool. The exterior SIPs have a high R rating of R-30 for the walls and R-50 for the roof. SIP construction is not only more insulated but also airtight, which enhances energy conservation. Low-E coated double glazed windows also improve the home’s energy efficiency. A PhotoVoltaic (PV) panel system can be added for an additional $6500-$10,000 to further reduce energy consumption.

Vía: plusmood.com

Weinerchaise, diseño de banco en ladrillos

The-Weinerchaise-by-Andy-Martin-Associates-furniture_005

Andy Martin Associates, expondrá la “Weinerchaise”.

Esta es la respuesta de Andy Martin, para el ladrillo como un objeto de inspiración “que es tan emblemática de materiales de construcción británico y pensé que vale la pena seguir en busca de inspiración. Individualmente un ladrillo parece poco, pero con los demás tiene la posibilidad de ser poética “, dice Martin.

Está construido enteramente de ladrillos de extrusión y corte de alambre delgado mediante el juego de conjunto y el método de unión es de resina. Los ladrillos se apilan en condiciones de servidumbre y precisión en un molde, y una vez establecido, tallada a mano en la forma diseñada. La pieza fue producida con la ayuda de los ladrillos de Weinerberger, uno de los fabricantes de ladrillos más grande y más innovadora de Europa.

The-Weinerchaise-by-Andy-Martin-Associates-furniture_004

The-Weinerchaise-by-Andy-Martin-Associates-furniture_003

The-Weinerchaise-by-Andy-Martin-Associates-furniture_002

The-Weinerchaise-by-Andy-Martin-Associates-furniture_001

The-Weinerchaise-by-Andy-Martin-Associates-furniture

The-Weinerchaise-by-Andy-Martin-Associates-furniture_006

At this year’s 100% Design show in London, Andy Martin Associates will be exhibiting the ‘Weinerchaise’ as part of the ‘100% Inspiration’ feature. This is Andy Martin’s response to the brick as an inspirational object, “it is such an iconic British building material and I thought it worth pursuing for inspiration. Individually a brick seems characterless but with others has the possibility to be poetic,” says Martin. It is constructed entirely of extruded and wire cut bricks using the thin set joint method and resin bonding. The bricks are stacked and bonded accurately in a mould, and once set, carved by hand to the designed shape. The piece was produced with the help of Weinerberger bricks, one of Europe’s largest and most innovative brick manufacturers.

Lámpara Chimney Pendant por Benjamin Hubert

Benjamin-Hubert-Chimney-furniture_002

Chimney es una colección artesanal, al horno de lámparas de barro colgantes.

Se producen en un estudio de cerámica en el País de Gales, y utilizan la arcilla natural de la región. El uso tradicional de la técnica manual de cada lámpara tiene su propio carácter único, con un acabado exterior con textura en contraste y un brillo interior de cristal blanco.

Llamado Chimney, las lámparas se hacen a mano y al horno, tiene como materia prima arcilla de la región en Gales, donde se producen.

Vía: dezeen.com

Benjamin-Hubert-Chimney-furniture_003
Benjamin-Hubert-Chimney-furniture_007 Benjamin-Hubert-Chimney-furniture_004

British designer Benjamin Hubert has created the Chimney pendant lamps for Viaduct.

Chimney is a collection of hand thrown, kiln fired clay pendant lamps. They are produced in a pottery studio in Wales and utilise the natural clay of the region. Using traditional hand thrown techniques each lamp has its own unique character with a textured exterior finish in contrast to a gloss white glazed interior.

Text vía: contemporist.com

Benjamin-Hubert-Chimney-furniture_009

Ideal Theatre, Concurso para estudiantes de arquitectura

usitt-architectural-contest-2009

Concurso de Arquitectura Ussit 2010

Por cuarto año consecutivo, estudiantes de Arquitectura y de Teatro de todo el mundo están invitados a participar en el Instituto estadounidense de teatro y tecnologías (USITT) “teatro ideal” Student Design Competition.

Esta competencia se ha establecido como el único Concurso Internacional de Diseño que reúne el “usuario cliente” y el “diseño” para explorar las posibilidades de lo que un teatro puede ser.

La competencia se extiende desde septiembre 4 de 2009 hasta el 19 de enero de 2010. Un profesional jurado seleccionará tres Premios de Honor en febrero de 2010.
La organización responde consultas hasta el 20 de noviembre 2009

Todas las presentaciones serán exhibidas en la Conferencia USITT.

Para obtener información adicional sobre la competencia del 2010 el la página de la Comisión www.USITT.org la arquitectura.

Intent to enter the competition is due 20 November 2009

For the Fourth year in a row University Architectural and Theatre Students from around the world are invited to take part in the United States Institute for Theatre and Technology’s (USITT) “Ideal Theatre” Student Design Competition.

This competition has established it self as the only International Design Competition that brings together the “client user’ and the “designer” to explore the possibilities of what a Theatre can be.   The competition runs from 4 September 2009 to 19 January 2010.

A Professional jury will select three Honor Awards in February 2010.  All submissions will be on exhibit at the USITT Conference.  For additional information on the 2010 competition please visit www.USITT.org  architecture commission page.

Vía:  thearchitectureroom.com